Vivo Y11S spare parts

Vivo Y11S Technical Specifications

The following are the technical specifications of the Vivo Y11S repuestos:

• Operating System: Funtouch 11 based on Android 10
• Display: 6.51-inch with 720x1600 pixels resolution
• Processor: Octa-core Qualcomm Snapdragon 460
• RAM and Storage: 3GB of RAM and 32GB of internal storage
• Camera: Dual camera setup with 13 MP and 2 MP sensors at the rear, 8 MP at the front
• Battery: 5000mAh

Instructions for Replacing Vivo Y11S Repuestos

Please ensure you have the necessary tools before embarking on any repair procedure. This includes a SIM card ejection tool, Torx Screwdriver, spudger, tweezers, and plastic opening tools.

Step 1: Turn off the device

Before starting any repair procedure, make sure to turn off your device to avoid any electrical damage.

Step 2: Remove SIM Tray

Using the SIM card ejection tool, safely remove the SIM tray from the device.

Step 3: Unscrewing the device

With the Torx Screwdriver, unscrew all the screws located along the border of the device, then open the back cover carefully with the help of the plastic opening tools.

Step 4: Disconnect Battery

Utilize the spudger to disconnect the battery connector from the motherboard.

Step 5: Replace required part

Identify the faulty part and carefully remove it. Replace the faulty part with a new, compatible Vivo Y11S repuesto.

Step 6: Reassemble the device

Reconnect the battery and screw in all the screws. Then, snap the back cover back onto the device and finally, insert the SIM card tray back into the device.

Please remember to take care and not force any component during the repair process as it may lead to permanent damage to the device. If at any point you are unsure, it is always best to consult with a professional or seek professional help.