Vivo Y16 spare parts

Technical Characteristics of Vivo Y16 Reouestos

The Vivo Y16 is a mid-range smartphone known for its balance of performance and affordability. Here are the technical characteristics of the Vivo Y16:

• Display: 6.51-inch HD+ IPS LCD
• Resolution: 1600 x 720 pixels
• Processor: MediaTek Helio P35
• RAM: 3GB
• Internal Storage: 32GB/64GB (expandable via microSD card)
• Rear Camera: Dual - 13MP (main) + 2MP (depth)
• Front Camera: 5MP
• Battery: 5000mAh
• Operating System: Funtouch OS based on Android
• Network: 4G LTE
• Security: Fingerprint sensor and facial recognition
• Connectivity: Wi-Fi, Bluetooth 5.0, GPS, micro-USB
• Dimensions: 164.41 x 76.32 x 8.41 mm
• Weight: 182 g

Instructions for Replacing Vivo Y16 Reouestos

Preparation

• Ensure that your Vivo Y16 is turned off before starting the replacement.
• Gather the necessary tools, including a small Phillips screwdriver, a plastic prying tool, tweezers, and a SIM ejector tool.
• Work on a clean, flat surface to avoid damaging any components.

Step-by-Step Replacement Instructions

Follow the steps below to replace the components of the Vivo Y16:

1. Remove the Back Cover

• Insert the SIM ejector tool into the SIM card tray hole and remove the SIM card tray.
• Use the plastic prying tool to gently pry around the edges of the back cover to separate it from the phone. Be cautious to avoid damaging the cover or the internals.

2. Disconnect the Battery

• Locate the battery connector on the motherboard.
• Use the plastic prying tool to gently disconnect the battery connector to avoid short-circuits.

3. Remove the Components

• Unscrew and remove the screws holding the mid-frame in place using the Phillips screwdriver.
• Carefully lift and remove the mid-frame.
• Disconnect any additional connectors (e.g., camera, display) that need to be replaced.

4. Replace the Reouestos

• Install the new components by connecting them to the appropriate ports.
• Ensure that all components are seated properly and securely connected.

5. Reassemble the Vivo Y16

• Reconnect the battery connector to the motherboard.
• Place the mid-frame back into position and secure it with the screws.
• Realign the back cover and press it firmly around the edges to snap it into place.
• Reinsert the SIM card tray.

6. Final Checks

• Power on the Vivo Y16 to ensure that it starts up correctly.
• Check that the new components are functioning as expected.

Following these steps carefully will help you successfully replace the components of your Vivo Y16. If you encounter any issues or are not confident in performing the replacement yourself, it is recommended to seek professional assistance.