Vivo Y20 spare parts

Vivo Y20 Repuestos: Technical Characteristics

The Vivo Y20 stands out because of its technical specifications, which include:

• Operating System: Android 10, Funtouch 10.5
• Processor: Qualcomm SM4250 Snapdragon 460 (11 nm)
• Display Type: IPS LCD
• Screen Size: 6.51 inches, 102.3 cm²
• Battery: Non-removable Li-Po 5000 mAh battery

Instructions for Replacing Vivo Y20 Repuestos

Tools Needed

The necessary tools for this process are:

• Precision Screwdrivers
• Tweezers
• plastic pry tool
• Suction cup
• Heat Gun or Hairdryer

Step-by-Step Guide

Follow the steps mentioned below to replace Vivo Y20 Repuestos:

1. Turn off the Vivo Y20.
2. Remove the SIM card tray from the phone.
3. Using the heat gun, apply gentle and evenly spread heat to the edges of the phone's screen to soften the adhesive.
4. Attach the suction cup to the front screen and create a gap between the frame and display assembly.
5. Insert the plastic pry tool into the gap and slide it around the phone to cut the adhesive.
6. Open the screen, but beware, the display assembly is still connected to the phone by several cables.
7. Disconnect these cables with the help of the precision screwdrivers and tweezers.
8. Once all connections are loose, the display assembly can be removed.
9. To install a new display, connect the cables of the new display assembly and press it into place.
10. Ensure that it is correctly positioned and the connections are firm.
11. Reassemble the phone and then turn it on.

Note: Proceed with caution as mishandling may damage the components. If in doubt, seek professional help.