Vivo Y55 5G spare parts

Vivo Y55 5G Technical Characteristics

The Vivo Y55 5G repuestos are integral to any restoration project and are a major component of this smartphone. They bring several technical attributes that maintain the high performance of this device.

• Display: 6.58-inch IPS LCD, 1080 x 2408 pixels, 20:9 ratio (~401 ppi density)
• Operating System: Android 11, Funtouch 11.1
• Chipset: MediaTek MT6833 Dimensity 700 5G (7 nm)
• Memory: 128GB 4GB RAM, 128GB 8GB RAM, UFS 2.1
• Battery: Li-Po 5000 mAh, non-removable, fast charging 18W

How to Replace Vivo Y55 5G Repuestos

Tools Required

You will need a fine-tip curved tweezer, a plastic opening tool or prying tool, and a precision screwdriver.

Step-by-Step Instructions

Follow the steps below to replace your Vivo Y55 5G repuestos:

1. Power off your phone: To avoid any potential damage, start by switching off your device.
2. Remove the sim tray: Use a sim tray tool to eject the sim tray.
3. Open the case: Use the plastic opening tool to unclip the clips securing the case. Start from the bottom and slowly work your way around.
4. Unscrew motherboard: Once inside, you will see several screws securing the motherboard. Use your precision screwdriver to remove these.
5. Detach connectors: Use the tweezer to detach any connectors that link the motherboard to other components.
6. Replace repuestos: Once the motherboard is free, you can replace the bric.
7. Reassemble your phone: Once you have replaced the bric, retrace your steps to reassemble your phone. Ensure all the connectors are properly attached and screws are tightly fastened.

Keep in mind that this guide requires patience and a steady hand, so take your time during this process and make sure to handle your device's delicate components with care.