Vivo Y70 Spare Parts

    There are 11 products.

    Vivo Y70 Repuestos - Technical Characteristics

    The Vivo Y70 Repuestos are made up of multiple high-quality components that contribute to the functionality of the Vivo Y70 smartphone. Here are some of the main components:

    • Display replacement: 6.44-inch AMOLED display with a resolution of 1080 x 2400 pixels, supports multitouch and features scrat...

    Vivo Y70 Repuestos - Technical Characteristics

    The Vivo Y70 Repuestos are made up of multiple high-quality components that contribute to the functionality of the Vivo Y70 smartphone. Here are some of the main components:

    • Display replacement: 6.44-inch AMOLED display with a resolution of 1080 x 2400 pixels, supports multitouch and features scratch-resistant glass.
    • Battery replacement: Non-removable Li-Po 4100 mAh battery, supports fast charging 33W, 65% in 30 min (advertised).
    • Camera replacement: 48 MP main camera, 2 MP macro camera and 2 MP depth sensor.
    • Motherboard replacement: Qualcomm SDM665 Snapdragon 665 chipset, Octa-core processor, and Adreno 610 GPU.
    • Vivo Y70 power button and volume button replacements: Plastic buttons located on the side of the device.

    Instructions for Vivo Y70 Repuestos Replacement

    Tools Required

    • Phillips Screwdriver
    • Spudger
    • Tweezers
    • Opening Picks

    Replacing the Display

    1) Turn off the phone and carefully remove the SIM card tray.

    2) Use an opening pick to pry and separate the back cover from the frame.

    3) Remove the Phillips screws securing the plastic shields and remove them.

    4) Disconnect the battery connector using a spudger, and the display connectors.

    5) Carefully separate the old display from the frame and replace it with the new one.

    Replacing the Battery

    1) After removing the back cover, unscrew and remove the plastic shields.

    2) Use a spudger to disconnect the battery connector.

    3) Carefully remove the adhesive holding the battery in place, and the battery itself.

    4) Install the new battery and reconnect the connector. Secure the battery with new adhesive if necessary.

    Replacing the Motherboard

    1) Unscrew and remove the plastic shields covering the motherboard after removing the back cover.

    2) Disconnect the various flex cables connected to the motherboard then lift and remove it carefully.

    3) Set the new motherboard in place, reattach the flex cables, and replace the plastic shields and screws.

    Note: Before performing any kind of repair, make sure the phone is turned off to avoid any potential electrical shorts.

    Less
    More
    Showing 1 - 11 of 11 items