Vivo Y75 5G spare parts

    There are 2 products.

    Vivo Y75 5G Repuestos Technical Specifications

    The Vivo Y75 5G is a high-end smartphone device featuring advanced hardware components and stunning aesthetics. Here, we present the technical characteristics of its major repuestos or replacement parts:

    • Display: 6.58” IPS LCD, Resolution: 1080 x 2408 pixels.
    • Processor: MediaTek MT6853 Dime...

    Vivo Y75 5G Repuestos Technical Specifications

    The Vivo Y75 5G is a high-end smartphone device featuring advanced hardware components and stunning aesthetics. Here, we present the technical characteristics of its major repuestos or replacement parts:

    • Display: 6.58” IPS LCD, Resolution: 1080 x 2408 pixels.
    • Processor: MediaTek MT6853 Dimensity 720 5G (7 nm).
    • RAM: 8GB.
    • Storage: 128GB, expandable via microSD.
    • Battery: Li-Po 5000 mAh, non-removable. Supports 18W fast charging.
    • Front Camera: Single 16 MP.
    • Rear Camera: Triple set-up with 48 MP (wide), 2 MP (macro) and 2 MP (depth).

    How to Replace Vivo Y75 5G Repuestos

    Please note: Replacing parts on your Vivo Y75 5G should be done by professionals or under the supervision of professionals to avoid further damage.

    Replacing Battery

    • Switch off your Vivo Y75 5G and remove the SIM card tray.
    • Remove the back cover using a heat gun and suction tool carefully.
    • Disconnect the battery connector and undo the screws securing the battery. Gently remove the battery using a plastic pry tool.
    • Replace with the new battery, re-secure the screws, and reattach the battery connector.

    Replacing Display

    • Switch off your smartphone and remove the SIM card tray.
    • Remove the back cover as described above.
    • Disconnect the display connector and undo the screws securing the display. Take out the old display carefully.
    • Install the new display, securing it with screws and reattaching the display connector.

    After each replacement, put the back cover back, ensuring it fits snugly onto the frame. If necessary, apply an adhesive or replacement adhesive strips to secure it. Then, power on your device to check the functionality of the new part.

    Less
    More
    Showing 1 - 2 of 2 items