Wiko Highway Pure spare parts

Technical Characteristics - Wiko Highway Pure Repuestos

Here are the technical details for the Wiko Highway Pure Repuestos.

• Screen: 4.8-inch touchscreen display with a resolution of 720 x 1280 pixels
• Integrated Memory: 16GB with 2GB RAM
• Main Camera: 8 megapixel rear camera
• Front Camera: 5 megapixel front for self-portraits
• Battery: 2000mAh battery

Instructions for Replacement of Wiko Highway Pure Repuestos

Please follow the below given detailed step-by-step guide for the replacement.

Tools Required

• Small Phillips Screwdriver
• Opening Tool
• Tweeze

Replacement Procedure

Step 1: Switch off your Wiko Highway Pure Repuestos smartphone and remove the SIM card and memory card, if any.

Step 2: With the help of an opening tool, carefully pry open the back cover from the edges. Please note that you should proceed with this step patiently and gently to avoid any damage to the device.

Step 3: Once the back cover is safely removed, you will see a series of screws that are fastening the inner back plate. Use the small Phillips screwdriver to remove these screws.

Step 4: After the screws are removed, gently pry off the inner back plate to expose the internal parts of the phone.

Step 5: Locate the battery connector on the motherboard. Unplug the battery connector and gently lift the battery off of the adhesive holding it in place.

Step 6: After the battery is out, you can proceed to replace any other internal parts like the camera, speaker, etc. with your new Wiko Highway Pure Repuestos. Each of these parts are attached to the motherboard with connectors that can be unclipped.

Step 7: Once you have replaced the necessary parts, reassemble the device by following the disassembly steps in reverse order.

Please make sure that every screw and connector is securely fastened. Insert the SIM card, memory card (if any), and switch on your device to check the functionality of the replaced components.