Wiko Jerry 2 spare parts

Technical Characteristics of Wiko Jerry 2 Repuestos

The Wiko Jerry 2 Repuestos are components of the Wiko Jerry 2 smartphone. These parts have been designed specifically for this model and include a range of different elements that contribute to the overall functionality and performance of the phone.

Screen

The display of the Wiko Jerry 2 is a 5.0-inch IPS LCD capacitive touchscreen with a resolution of 480 x 854 pixels.

Camera

The Wiko Jerry 2 boasts a 5 megapixel rear camera with LED flash and a 2 megapixel front camera, perfect for capturing crisp images and videos.

Battery

The replacement battery for the Wiko Jerry 2 is a Li-Ion 2050mAh battery, which provides extended battery life and reliable performance.

Instructions for Replacing Wiko Jerry 2 Repuestos

Tools Needed

• Small Phillips screwdriver
• Plastic opening tool
• Spudger
• Tweezers

Instructions

Replacing components on your Wiko Jerry 2 smartphone involves several steps. Always ensure the device is powered off before starting any replacement procedure.

Step 1: Battery Replacement

To replace the battery, you will first need to remove the back cover of your phone. Use the plastic opening tool to pry open the case and access the battery. Once the battery is visible, gently lift it out with the spudger tool.

Step 2: Screen Replacement

To replace the screen, you will need to take out the battery first as described above. Afterwards, take out the 10 screws on the back of the device using the Philips screwdriver. Proceed by carefully separating the front and back of your device with the plastic opening tools and your fingers.

Once inside, disconnect the screen connector by lifting the black latch upwards and gently pulling the strip out. Replace the old screen with a new one and follow the steps in reverse to put your phone back together.

Step 3: Camera Replacement

The camera can be replaced by first removing the back cover, the battery, and the 10 screws described in previous steps. Once you've done this, turn your phone around and push out the camera carefully. Place the new camera in the same bracket and follow the steps in reverse to reassemble your device.

Note: Please handle the components carefully to avoid any static damage.