Wiko Lenny 5 spare parts

    There are 8 products.

    Technical Specifications of Wiko Lenny 5 Repuestos

    The Wiko Lenny 5 Repuestos is an exceptional smartphone featuring:

    • Display: 5.7 inches, IPS LCD, 720 x 1440 pixels resolution
    • Processor: Quad-core, 1.3 GHz, Cortex A7
    • Memory: Internal 16GB, RAM 1GB, expandable via MicroSD card up to 32GB
    • Battery: Removable 2800 mAh
    • Camera: Rear 8 MP,...

    Technical Specifications of Wiko Lenny 5 Repuestos

    The Wiko Lenny 5 Repuestos is an exceptional smartphone featuring:

    • Display: 5.7 inches, IPS LCD, 720 x 1440 pixels resolution
    • Processor: Quad-core, 1.3 GHz, Cortex A7
    • Memory: Internal 16GB, RAM 1GB, expandable via MicroSD card up to 32GB
    • Battery: Removable 2800 mAh
    • Camera: Rear 8 MP, Front 5 MP
    • Operating System: Android 8.1 Oreo (Go edition)

    Instructions for Replacing Wiko Lenny 5 Repuestos

    Below are the detailed instructions for replacing components on the Wiko Lenny 5:

    Screen Replacement

    Replace the screen if it's cracked or not responding.

    • 1. Power off the device and remove the back cover.
    • 2. Disconnect the battery connector from the main board.
    • 3. Remove all the screws securing the screen frame.
    • 4. Carefully push the old screen out from the frame.
    • 5. Replace with the new screen and follow these steps in reverse to reassemble the device.

    Battery Replacement

    Replace the battery if it's no longer holding a charge or if the device powers off unexpectedly.

    • 1. Power off the device and remove the back cover.
    • 2. Peel the adhesive tape holding the battery and gently lift the battery out of the device.
    • 3. Place the new battery in the device and replace the adhesive tape.
    • 4. Put the cover back and turn on the device to check the new battery status.

    Camera Replacement

    If your camera isn't working properly or producing blurry images, you may need to replace it.

    • 1. Power off the device and remove the back cover.
    • 2. Disconnect the battery and carefully remove the screws holding the camera in place.
    • 3. Replace the old camera with the new one and follow these steps in reverse to reassemble the device.
    Less
    More
    Showing 1 - 8 of 8 items