Wiko View 3 Pro spare parts

Technical Characteristics of Wiko View 3 Pro Repuestos

The Wiko View 3 Pro Repuestos is a high-quality component part used in the Wiko View 3 Pro smartphone. Below, we explore some of the device's unique technical attributes:

• Screen: The View 3 Pro comes with a 6.3-inch IPS panel that has a pixel resolution of 2340 x 1080.
• Processor: It operates using a Mediatek Helio P60 processor.
• Storage and RAM: The smartphone has 64GB of internal storage space, extendable via MicroSD, coupled with 4GB of RAM.
• Battery: A 4000mAh battery powers the View 3 Pro, ensuring longer usage times.
• Cameras: The device sports a dual rear camera setup with a 12MP primary sensor and a 13MP secondary sensor, along with a 16MP front-facing camera.

Instructions for Replacing Wiko View 3 Pro Repuestos

Carrying out a replacement of the components (Repuestos) of your Wiko View 3 Pro is a meticulous process which requires the following steps:

Tools Needed

You will require the following tools for this process:

• Screwdrivers
• Plastic opening tools
• Precision Tweezers
• Pry tool

Step-by-Step Guide

Follow the steps below:

1. First, power off your Wiko View 3 Pro to prevent any damages.
2. Remove the back cover with the help of the plastic opening tool.
3. Detach the battery connector by removing the screws around it, then lift it out carefully using tweezers.
4. Next, disconnect the cable of the camera and carefully replace it with the new one.
5. Remove the screws around the motherboard and replace any defective parts.
6. Subsequently, replace the screen: disconnect the display connector, remove the old screen, and carefully fix the new screen in place.
7. Finally, reassemble all the disconnected parts, reinsert the screws, and fix the back cover tightly.

Note

This is a general guide to replace parts of the Wiko View 3 Pro. The process might vary depending on the specific part you are replacing. Always remember to disconnect the battery first to avoid short circuits during replacement.