Woxter Zielo Z500 spare parts
There is 1 product.Technical Characteristics of Woxter Zielo Z500 Repuestos
The Woxter Zielo Z500 is a high-performance smartphone with reputable replacement parts popularly referred to as 'repuestos'. Here are the key technical characteristics of the Woxter Zielo Z500 repuestos:
- Screen: It comes with a 5 inch IPS LCD display with a resolution of 720 x 1280 pix...
Technical Characteristics of Woxter Zielo Z500 Repuestos
The Woxter Zielo Z500 is a high-performance smartphone with reputable replacement parts popularly referred to as 'repuestos'. Here are the key technical characteristics of the Woxter Zielo Z500 repuestos:
- Screen: It comes with a 5 inch IPS LCD display with a resolution of 720 x 1280 pixels.
- Processor: The device features a Quad-core 1.3 GHz Cortex-A7 processor for a seamless performance.
- Memory: It is equipped with a storage capacity of 4GB, which is expandable up to 32GB with a microSD card.
- Camera: It has an 8MP rear camera with LED flash and a 2MP front camera.
- Battery: It is fuelled with a Li-Ion 2000 mAh battery.
Instructions for Replacing Woxter Zielo Z500 Repuestos
Please follow these detailed steps to effortlessly replace the Woxter Zielo Z500 repuestos.
Tools Required:
- Micro Phillips Screwdriver
- Spudger or Pry Tool
- Suction Cup Tool
Procedure:
Before starting, ensure you have turned off the phone to prevent any electrical damage.
- Step 1: Begin by removing the back cover of the phone. You can use a spudger or prying tool for this step.
- Step 2: Next, take the micro Phillips screwdriver and unscrew all the screws that keep the inner case intact.
- Step 3: Carefully start lifting the inner case from the bottom up. Try not to directly pull it up as there are connectors attached to it.
- Step 4: Now, carefully disconnect the connectors to separate both parts.
- Step 5: Once the connectors are disconnected, you can safely remove the component you wish to replace.
- Step 6: Place the new repuesto in its appropriate place, reconnect the connectors, and reattach the inner case.
- Step 7: Screw in the screws back to place.
- Final Step: Put back the back cover and ensure it is firmly in place.
Note: Be sure to gently handle the components of the phone to avoid any damage.
Less More
Out of stock