Spare part Xiaomi Redmi Note 8T

Technical Characteristics of Repuestos Xiaomi Redmi Note 8T

The Repuestos Xiaomi Redmi Note 8T is a popular phone option with a range of features and options. Here's a quick overview of its technical specifications.

• Display: 6.3 inches, 1080 x 2340 pixels, IPS LCD capacitive touchscreen
• Processor: Qualcomm SDM665 Snapdragon 665
• RAM: 3/4 GB
• Storage: 32/64/128 GB
• Camera: Quad 48MP + 8MP + 2MP + 2MP rear, 13 MP front
• Battery: Non-removable Li-Po 4000 mAh battery
• Operating System: Android 9.0 (Pie), upgradable to Android 10, MIUI 12
• Other Features: Bluetooth 4.2, Wi-Fi 802.11, GPS, NFC, Radio

Instructions for Replacing Repuestos Xiaomi Redmi Note 8T

Before you start with the replacement process, make sure to power off your phone, remove the SIM card, SD card, and any connected cables for safety.

Step 1: Removing the back cover

Use a heat gun or a blow dryer to gently warm up the adhesive holding the back cover. Then, use a suction cup and a thin, flat tool to pry open the cover. Be aware of any ribbon cables connected to prevent damaging them.

Step 2: Removing the battery

Unscrew and remove the plastic shield covering the motherboard. Disconnect the battery connector from the motherboard, then gently lift the battery using a pry tool. The adhesive can be strong, so be careful not to puncture or bend the battery.

Step 3: Replacing the component

Depending on which part requires replacement, locate its connection on the motherboard and disconnect it. Take the new component and connect it in the same position.

Step 4: Reassembly

Once the component is securely connected, reinsert the battery, connect it to the motherboard, and replace the plastic shield. Then, firmly press the back cover into place until it clicks. If necessary, apply some heat to reactivate the adhesive.

Please contact a professional if you face difficulties during the repair process.