Xiaomi 12T Pro spare parts

Xiaomi 12T Pro Technical Specifications

The Xiaomi 12T Pro is an advanced smartphone designed to deliver impressive performance, offering a powerful combination of features and specifications. Here are the main technical characteristics of the Xiaomi 12T Pro:

• Display: 144 Hz AMOLED, 6.67 inches, 1080 x 2400 pixels, HDR10+, 1200 nits
• Processor: Qualcomm Snapdragon 8 Gen 1, Octa-core
• Memory: 8GB/12GB RAM, 128GB/256GB/512GB storage options
• Camera: Triple rear camera (108MP, 13MP ultra-wide, 5MP telephoto macro), 20MP front camera
• Battery: 5000mAh, supports 120W fast charging, 50W wireless charging, 10W reverse wireless charging
• OS: Android 11, MIUI 13

Xiaomi 12T Pro Repuestos Replacement Instructions

Replacing parts on the Xiaomi 12T Pro requires careful attention and the right tools. Always make sure your device is switched off and unplugged before you start the replacement process. The following are the steps to replace parts:

1. Remove the SIM Tray

Using the SIM card removal tool, carefully eject and remove the SIM card tray from the device.

2. Remove the Back Cover

Use a heat gun to warm the edges of the back cover to loosen the adhesive. Then use a thin prying tool to gently lift the back cover.

3. Detach the Battery Connector

Locate the battery connector on the motherboard. Use a plastic spudger tool to gently disconnect the battery connector.

4. Remove the Battery

Use the same spudger tool to gently pry and remove the battery. Be careful not to puncture the battery while doing this.

5. Replace the Component

Replace the malfunctioning component with the new replacement part. Make sure to reconnect all connectors securely.

6. Reassemble the Phone

Replace the battery and reconnect the battery connector. Then, reattach the back cover securely. Finally, insert the SIM card tray back into the slot.

Always remember that forceful handling can damage the components so use caution and patience during this process.