Xiaomi 13T Pro spare parts

Xiaomi 13T Pro Repuestos Technical Characteristics

The Xiaomi 13T Pro is a feature-rich smartphone with a variety of high-end components designed for top performance. The replacement parts, or "repuestos", for this model have the following technical characteristics:

• Screen: AMOLED, 1B colors, 120Hz, HDR10+, 1300 nits (peak)
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~403 ppi density)
• Chipset: Qualcomm SM8350 Snapdragon 888+ 5G
• Memory: 256GB 8GB RAM, 256GB 12GB RAM, 512GB 12GB RAM
• Camera: 108 MP, f/1.8, 26mm (wide), 1/1.33", 0.8µm, PDAF, Laser AF, OIS
• Battery: Li-Po 5000 mAh, non-removable

Instructions for Xiaomi 13T Pro Repuestos Replacement

1. Tools Needed

Before starting the replacement process, ensure you have the following tools:

• Screwdriver
• Spudger
• Heat gun
• Tweezers

2. Power Off The Device

Always turn off your device before beginning any repair process to avoid electrical shocks or short circuits.

3. Remove The Back Cover

Use the heat gun to loosen the adhesive of the back cover. Proceed with caution as you pry the back cover off using the spudger.

4. Remove The Battery

Disconnect the battery connector using tweezers. Then, use the spudger to pry the battery off safely.

5. Remove The Damaged Component

Use the screwdriver to remove any screws securing the damaged component. Be careful as you lift out the damaged part to avoid harming any nearby components.

6. Install The New Repuesto

Check the new component for any damage or defects. Once confirmed, carefully fix the new part in place and secure it with screws, if needed.

7. Reassemble The Device

Reconnect the battery and fix the back cover into place, making sure to reapply adhesive where necessary.

8. Test The Device

Turn on your device to confirm the successful replacement of the component. Ensure everything functions as expected.