Xiaomi Mi 10 Lite 5G spare parts

Xiaomi Mi 10 Lite 5G Repuestos Technical Specifications

The Xiaomi Mi 10 Lite 5G Repuestos is a phenomenal smartphone packed with incredible hardware. It's suitable for any user due to its dependable performance and distinctive features.

• Display: 6.57" AMOLED, 2400x1080 pixels, 20:9 ratio
• Processor: Qualcomm Snapdragon 765G
• RAM: 6 GB / 8 GB
• Internal Storage: 128GB / 256GB
• Battery: 4160mAh, non-removable Li-Po
• Rear Camera: Quad camera setup - 48 MP, 8 MP, 2 MP, 2 MP
• Front Camera: 16 MP
• Operating System: MIUI, based on Android 10

Instructions on How to Replace Xiaomi Mi 10 Lite 5G Repuestos

Replacing Xiaomi Mi 10 Lite 5G Repuestos may require some expertise, therefore, if you do not have previous experience, consider reaching an expert. Here are the detailed steps if you wish to perform it:

Tools Needed

• Screwdriver set
• Spudger
• Tweezers
• Opening picks
• Suction handle
• Heat gun

Step-by-Step Guide

• Power off the Xiaomi Mi 10 Lite 5G.
• Remove the SIM card tray from the device.
• Heat the edges of the back cover for about 2 minutes with a heat gun to loosen the adhesive.
• With the help of suction handle and opening picks, carefully lift and detach the back cover.
• Using a screwdriver, remove all the screws to release the shield covering the motherboard.
• Disconnect the battery connector and other connectors linking to the motherboard.
• Slowly and carefully pull out the motherboard from its housing.
• Now you got access to replace the parts as per your need.
• After the replacement, reassemble your Xiaomi Mi 10 Lite 5G by following the disassembly steps in reverse.

Note: Always remember to apply adhesive where necessary during the reassembly.