Xiaomi Mi 10 Pro 5G spare parts

Xiaomi Mi 10 Pro 5G Repuestos Technical Characteristics

The Xiaomi Mi 10 Pro 5G consists of numerous high-quality components that enhance its performance and durability. Here are the key repuestos (spare parts) that you might need to replace:

• Screen: The display is a 6.67 inch AMOLED with a resolution of 1080 x 2340 pixels.

• Battery: It is equipped with a 4500mAh lithium-polymer battery.

• Back Camera: Contains a quad camera system with a primary 108MP lens.

• Front Camera: The selfie camera is 20MP.

• Processor: Snapdragon 865.

• RAM: Available in 8GB and 12GB variations.

• Storage: Comes in 256GB or 512GB variants.

Replacing Xiaomi Mi 10 Pro 5G Repuestos

Replacement of Xiaomi Mi 10 Pro 5G repuestos should be done carefully in order to avoid damaging other components. Here's a step-by-step guide:

Screen Replacement

• Power off the device.

• Remove the SIM Tray.

• Heat the edges of the screen to loosen the adhesive.

• Carefully lift the screen using a suction tool.

• Disconnect the screen connector from the motherboard.

• Remove the broken screen and replace it with a new one.

• Reassemble the phone by reversing the process.

Battery Replacement

• Turn off the device.

• Remove the back cover using a heating tool and a pry tool.

• Remove all the screws fixing the protective plate.

• Disconnect the battery connector.

• Replace the old battery with a new one.

• Reassemble the phone by following the disassembly steps in reverse order.

Note: Always ensure the phone is powered off before beginning any repair work and wear an anti-static wrist strap to prevent electronic damage.