Xiaomi Mi 10T Lite 5G spare parts

Xiaomi Mi 10T Lite 5G Repuestos: Technical Specifications

The Xiaomi Mi 10T Lite 5G is a powerful smartphone that comes with advanced technical features. Here are some of the repuestos, or replacement parts, available for this device:

• Display: IPS LCD, HDR10, 120Hz, 6.67 inches, 1080 x 2400 pixels
• Battery: Li-Po 4820 mAh, non-removable
• Back camera: Quad camera; 64 MP (wide), 8 MP (ultrawide), 2 MP (macro), 2 MP (depth)
• Front camera: Single; 16 MP, wide.
• Charger port: USB Type-C

Instructions on How to Replace Xiaomi Mi 10T Lite 5G Repuestos

Preparation

Before you begin, make sure you have the necessary tools, including a pry tool, screwdriver set, plastic spudger, and tweezers.

Display Replacement

• 1. Power off the phone and remove the SIM card tray.
• 2. Use a heat gun to warm up the edges of the screen. This loosens the adhesive.
• 3. Carefully pry open the phone using the pry tool and plastic spudger.
• 4. Disconnect the battery and screen cables from the motherboard.
• 5. Remove the old display and replace it with the new one. Reconnect the cables and reapply adhesive.

Battery Replacement

• 1. After opening the phone as stated above, locate the battery.
• 2. Gently disconnect the battery connector from the motherboard.
• 3. The battery is glued down, so you'll have to gently pry it up. Be careful not to puncture the battery.
• 4. Insert the new battery, reconnect the connector, and close the phone.

Remember, always take the proper precautions when working with electronic devices. Ensure you are grounded to avoid any electrostatic damage to the device.