Xiaomi Mi 11 Pro spare parts

Xiaomi Mi 11 Pro Technical Specifications

The Xiaomi Mi 11 Pro is a state-of-the-art phone with many impressive features. Below are some of the key technical characteristics :

• Display: 6.81 inches, 1440 x 3200 pixels, 120Hz, HDR10+, 1500 nits (peak)
• Processor: Qualcomm SM8350 Snapdragon 888 5G (5 nm)
• RAM: 8GB/12GB
• Storage: 128GB/256GB, UFS 3.1
• Camera: 50 MP, f/2.0, 24mm (wide), 1/1.12", 1.4µm, Dual Pixel PDAF, OIS
• Operating System: MIUI 12, upgradable to MIUI 12.5
• Battery: Li-Po 5000 mAh, non-removable, 67W fast charging, 100% in 36 min (advertised)

How to Replace Xiaomi Mi 11 Pro Spare Parts

Tools Needed

• Screwdriver set
• Plastic opening tools
• Spudger
• Tweezers

Note: These instructions vary according to the spare part you are replacing. In this guide, we'll cover screen replacement, one of the most common repairs.

Steps to Replace the Screen of a Xiaomi Mi 11 Pro

• Ensure the device is powered off, and if possible, remove the battery.
• Use the plastic opening tools to gently pry the back case of the device off.
• Locate and remove all screws attaching the screen to the device using the appropriate screwdriver.
• Carefully lift the old screen from the device using the plastic opening tool or spudger.
• Disconnect any connected cables or ribbons.
• Place the new screen into position and connect any cables or ribbons.
• Replace the screws, reattaching the screen to the device.
• Clip the back of the phone case back into place.
• Switch on the device and test to see if the new screen is functioning correctly.

Remember always to work carefully as smartphone components can be delicate and challenging to replace if damaged.