Xiaomi Mi 11I spare parts

Xiaomi Mi 11I Technical Specifications

The Xiaomi Mi 11I is a luxurious smartphone with excellent features. Below are some of its key technical properties.

• Processor: Qualcomm SM8350 Snapdragon 888 5G (5 nm)
• Display: AMOLED, HDR10+, 120Hz, 1300 nits (peak)
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~395 PPI density)
• Operating System: Android 11, MIUI 12
• Memory: 128GB/256GB storage, no card slot
• RAM: 8GB RAM
• Camera: 108 MP, f/1.8, 26mm
• Battery: Li-Po 4520 mAh battery, fast charging 33W

Instructions on How to Replace Xiaomi Mi 11I Repuestos

Before proceeding, make sure you have the necessary Xiaomi Mi 11I repuestos and tools.

1. Turn off the phone

It's always a good idea to turn off the phone before you start the repair process to avoid short circuits.

2. Remove the back panel

Use a pry tool to gently remove the back cover. Start at one corner and slide the pry tool along the edges.

3. Detach the battery connector

Before removing other components, it's important to disconnect the battery. Use a plastic spudger to lift the battery connector from its socket on the motherboard.

4. Remove the necessary components

Depending on the repuestos you want to replace, you may need to remove several screws and components. Always keep track of all screws and their original locations.

5. Replace the repuestos

Once the faulty components are out of the way, you can install the new ones. Make sure each piece fits perfectly into the intended spot.

6. Reassemble the phone

Reconnect the battery, and carefully replace the back cover. Make sure it snaps into place all around.

Note:

Proceed with caution during the entire process as some components may break easily. If in doubt, seek help from a professional.