Xiaomi Mi 6X spare parts

Xiaomi Mi 6X: Technical Characteristics

The Xiaomi Mi 6X, known as Mi A2 in some markets, is a popular smartphone with the following technical characteristics:

• Screen: 5.99 inches, 1080 x 2160 pixels, IPS LCD
• OS: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie)
• Processor: Qualcomm SDM660 Snapdragon 660 (14 nm)
• Memory: 64GB 4GB RAM, 128GB 6GB RAM
• Camera: Rear - Dual 12 MP, Front - 20 MP
• Battery: Non-removable Li-Po 3010 mAh battery

Guide to Replacing Xiaomi Mi 6X Repuestos (Parts)

The following is a basic guide to replacing parts in the Xiaomi Mi 6X. Please remember to always power off your device, and ground yourself to prevent static electricity before starting any repair work. The example below is for screen replacement.

Tools Required

• Screwdriver
• Plastic Pry Tool
• Suction Cup
• New Replacement Part

Step by Step Instructions

• Start by switching off your Xiaomi Mi 6X and removing the SIM card tray.

• Using the screwdriver, remove the two screws at the bottom of the device.

• Attach the suction cup to the screen and gently pull up to create a gap between the screen and the frame.

• Insert the plastic pry tool in the gap and slowly move it along the edge to separate the screen from the frame.

• Disconnect the old screen connector by removing the screws and the metal plate holding it.

• Now you can attach the new screen. Connect it to the phone using the connector.

• Secure it with the metal plate and screws.

• Push the new screen into the frame, making sure it fits well in all edges.

• Finally, replace the two screws at the bottom of the device and re-insert your SIM card tray.

Please note that this is a simplified guide and not a comprehensive replacement manual. Some parts may require additional steps.