Xiaomi Mi 8 SE spare parts

Xiaomi Mi 8 SE Repuestos - Technical Characteristics

The following are the key technical characteristics of the Xiaomi Mi 8 SE Repuestos:

• Screen: 5.88 inch Super AMOLED, 1080 x 2244 pixels, 18.7:9 ratio (~423 ppi density), Corning Gorilla Glass 5.
• Battery: Non-removable Li-Po 3120 mAh battery.
• Camera: Dual 12 MP, f/1.9, 1/2.55", 1.4µm, dual pixel PDAF + 5 MP main camera and 20 MP, f/2.0, 0.9µm selfie camera.
• Storage: 64/128 GB, 6 GB RAM or 4 GB RAM.
• CPU: Qualcomm SDM710 Snapdragon 710 (10 nm).
• Operating System: MIUI 10 based on Android 8.1 (Oreo), upgradable to Android 9.0 (Pie).
• Other Repuestos: Charging Port, Loudspeaker, Power & Volume buttons, Proximity Sensor, Earpiece Speaker.

Instructions for Replacing Xiaomi Mi 8 SE Repuestos

Step 1: Gather Necessary Tools

Before starting, ensure you have the following tools: SIM Card Ejector Tool, Heat Gun/Blow Dryer, Suction Cup, Opening Tool, Tweezers, Philips Screwdriver, Spudger.

Step 2: Power off the Phone and Remove the SIM Tray

Turn off your Xiaomi Mi 8 SE and remove the SIM card tray with the ejector tool.

Step 3: Soften the Adhesive

Use a heat gun or blow dryer to apply low heat around the edges of the back cover. This will soften the adhesive making it easier to remove the cover.

Step 4: Remove the Back Cover

Place the suction cup on the lower part of the back cover. While pulling the suction cup, use the opening tool to carefully pry up the back cover.

Step 5: Remove Related Repuestos

Remove the corresponding screws using the Philips Screwdriver, and carefully lift the parts using the Tweezers or Spudger.

Step 6: Replace the Faulty Part

Once the defected part is removed, replace it with the new repuesto. Be sure to properly align the repuesto before securing it with the screws.

Step 7: Reassemble the Phone

Follow the disassembly steps in reverse order to reassemble your phone. Power on the device to check that the new parts are functioning properly.

Note: Please exercise caution while performing these steps to avoid any damages to your device. It is recommended to take your device to a professional if you don't feel confident performing these steps.