Xiaomi Mi 8 spare parts

Technical Specifications of Xiaomi Mi 8 Repuestos

Xiaomi Mi 8 repuestos refers to the spare parts utilised in the repair and replacement of the Xiaomi Mi 8 smartphone components. Below are a few technical characteristics:

• Screen: 6.21" AMOLED, 1080 x 2248 pixels, 402 PPI
• Battery: 3400 mAh, Li-Polymer, non-removable
• Processor: Qualcomm Snapdragon 845, Octa-core (4x2.8 GHz Kryo 385 Gold & 4x1.8 GHz Kryo 385 Silver)
• RAM: 6GB/8GB
• Storage: Non-expandable 64GB/128GB/256GB internal storage
• Camera: 12MP+12MP dual rear camera, 20MP front camera

Replacement Instructions for Xiaomi Mi 8 Repuestos

Before we start, please make sure you have the necessary replacement parts and tools. Turn off your device before beginning the replacement process.

Screen Replacement

• Using a heat gun or a blowdryer, warm the edges of the device for about a minute. This softens the adhesive securing the screen.

• Place a suction cup on the screen near the heated edge, then carefully lift the screen using a plastic pry tool.

• Disconnect the screen cable connector and remove the broken screen.

• Attach the new screen, ensuring the cable connects properly. Carefully lower the screen back into place, pressing the edges to secure the adhesive.

Battery Replacement

• First, remove the back cover of the device following the same steps as the screen replacement.

• After reaching the battery, disconnect the battery connector from the motherboard. Carefully pry the battery out of its housing.

• Place the new battery into the device and connect the cable to the motherboard. Put the back cover of the device back in place.

After the replacement, turn on your device to check if everything works as expected. If there's any unordinary behavior, double-check your steps and the connections.