Xiaomi Mi 9 spare parts

Technical Characteristics of Xiaomi Mi 9 Repuestos

The Xiaomi Mi 9 Repuestos (replacement parts) retains several high-quality components that have made the Xiaomi Mi 9 series widely popular.

• Screen: 6.39 inch AMOLED, 1080 x 2340 pixels, Corning Gorilla Glass 6
• Processor: Qualcomm SDM855 Snapdragon 855 (7 nm), Octa-core
• RAM: 6GB / 8GB
• Storage: 64GB / 128GB, non-expandable
• Camera: Triple Camera (48MP + 16MP + 12MP), 20MP Front Camera
• Battery: 3300mAh, fast charging (27W), wireless charging (20W)

Instructions for Replacing Xiaomi Mi 9 Repuestos

Tools Required

• Plastic opening tools
• Phillips #000 Screwdriver
• Tweezers
• Spudger

Steps to replace Xiaomi Mi 9 Repuestos

1. Power Off Your Phone: Always start by shutting down your phone to prevent any electrical damage.

2. Remove the SIM Tray: Use the SIM card ejection tool to remove the SIM card tray.

3. Remove the Back Cover: Heat the edges of the device for a few minutes to soften the adhesive. Then carefully insert a plastic opening tool into the small gap between the back cover and the frame of the phone. Move it along the edge to cut the adhesive. Afterwards, use a suction cup to lift the back cover up.

4. Disconnect the Battery: After removing the back cover, locate the battery connector and disconnect it using a spudger.

5. Remove Screws: Use your Phillips #000 screwdriver to remove all the screws securing the motherboard and other components.

6. Lift Out the Components: Use a spudger to carefully lift out the component you are replacing. Be it the battery, screen or any other components.

7. Replace Component: Place your new replacement part into place.

8. Reassemble: Repeat the above steps in reverse order to reassemble your device.

Remember to be patient and take your time while doing this, as rushing it may cause more harm than good.