Xiaomi Mi Mix 4 spare parts

    There are 20 products.

    Xiaomi Mi Mix 4 Repuestos Specifications

    The following is a comprehensive detail of the specifications of Xiaomi Mi Mix 4 Repuestos.

    • Screen: High-quality AMOLED, 1B colors, 120Hz, HDR10+, peak 800 nits (HBM)
    • Resolution: 1080 x 2400 pixels
    • Replacement Battery: Non-removable Li-Po 4500 mAh battery
    • Charging Port: USB Type-C 2.0, supports fas...

    Xiaomi Mi Mix 4 Repuestos Specifications

    The following is a comprehensive detail of the specifications of Xiaomi Mi Mix 4 Repuestos.

    • Screen: High-quality AMOLED, 1B colors, 120Hz, HDR10+, peak 800 nits (HBM)
    • Resolution: 1080 x 2400 pixels
    • Replacement Battery: Non-removable Li-Po 4500 mAh battery
    • Charging Port: USB Type-C 2.0, supports fast charging at 120W and fast wireless charging at 50W
    • Camera Assembly: Triple rear cameras with 108 MP, 13 MP and 8 MP. Front under display camera: 20 MP

    Instructions to Replace Xiaomi Mi Mix 4 Repuestos

    Please follow the instructions carefully for replacing the Xiaomi Mi Mix 4 parts.

    Tools Needed

    • Opening Picks
    • Hair Dryer / Heat Gun
    • Spudger
    • Phillips #00 Screwdriver
    • Tweezers

    Step 1: Power off and Remove the SIM card tray

    Before you begin, make sure to power off your Xiaomi Mi Mix 4 and take out the SIM card tray.

    Step 2: Heat up and Open the Back Panel

    Use a hairdryer or heat gun to heat up the edges of the back panel. Slide an opening pick along the edges and lift the back panel carefully.

    Step 3: Unscrew and Remove the Rear housing

    Unscrew all the screws securing the rear housing using a Phillips #00 screwdriver and remove it gently.

    Step 4: Disconnect and Replace the Part

    Use a spudger to disconnect the cable connectors and unscrew the parts you want to replace. Install the new components, reconnect the cable connectors and screw them back into place.

    Step 5: Reassemble Your Phone

    Reinstall the rear housing and screw it in place. Finally, carefully replace the back panel and reinsert the SIM card tray.

    Power on your phone to verify that the replaced parts are working properly.

    Less
    More
    Showing 1 - 20 of 20 items