The Xiaomi Mi Note 10 Pro is powered by a Qualcomm Snapdragon 730G processor and it comes with 8GB of RAM. The phone packs 256GB of internal storage. It runs Android 9 and is powered by a 5260mAh non-removable battery.
The Xiaomi Mi Note 10 Pro is powered by a Qualcomm Snapdragon 730G processor and it comes with 8GB of RAM. The phone packs 256GB of internal storage. It runs Android 9 and is powered by a 5260mAh non-removable battery.
Follow these steps carefully to ensure that your device is safely disassembled and the parts are properly replaced.
Before you start disassembling your phone, it's necessary to shut it off to prevent electrical damage.
Use the SIM eject tool to remove the SIM tray.
Using your plastic opening tool/pry tool, gently pry off the back case of the phone. Start at the bottom and slowly work your way up the sides. Be careful not to apply too much force as it can break the back panel.
Use your Phillips screwdriver to remove the screws securing the back cover of the phone. After you've removed all the screws, disconnect any visible cables using your prying tool.
With the back now off, you can replace the desired repuestos. The battery, camera, speakers, and much more are now accessible for replacement. Replace the parts as needed and then reconnect all cables.
Retrace your steps to put your device back together. Be sure to replace all screws and double check that everything is back in place correctly.
Note: This guide is only for educational purposes. Replacing parts can void your warranty and damage your device if not done correctly. Please seek professional help if unsure.
LessBack cover or battery cover white by Xiaomi Mi Note 10 CSL
Back cover or battery cover white by Xiaomi Mi CC9 Pro Mi Note 10 M1910F4E M1910F4G
Back cover or battery cover green by Xiaomi Mi Note 10 CSL
Back cover or battery cover green by Xiaomi Mi Note 10
Back cover or battery cover black by Xiaomi Mi Note 10 CSL
Back cover or battery cover black by Xiaomi Mi Note 10