The Xiaomi Poco F4 GT spares come with the following technical characteristics:
The Xiaomi Poco F4 GT spares come with the following technical characteristics:
Please follow the detailed instructions below:
Ensure you have powered off your Xiaomi Poco F4 GT to prevent further damage during the replacement process.
Gently heat the back cover of your phone with a heat gun to loosen the adhesive. Use a thin, flat tool such as a plastic spudger or a guitar pick to pry the back cover open.
Locate the battery connector and use a spudger to carefully disconnect it from the phone’s motherboard.
Depend on the parts that you want to replace, the procedures could be different. But in general, locate the damaged part, remove any screws holding the part in place, and then gently remove it from the phone. Replace the damaged part with the new one.
Once you have replaced the damaged part(s), reverse the steps to re-assemble the phone. Then, power on the phone to check if everything is working properly.
Note: The Xiaomi Poco F4 GT is complex and certain components can be easily damaged during disassembly/re-assembly. If unsure, please seek professional assistance.
LessBack housing or cover silver by Xiaomi Poco F4 GT with camera lens CSL
Back housing or cover silver by Xiaomi Poco F4 GT CSL
Back housing or cover black by Xiaomi Poco F4 GT with camera lens CSL
Back housing or cover black by Xiaomi Poco F4 GT CSL
Back cover or battery cover yellow by Xiaomi Poco F4 GT with camera cover
Back cover or battery cover silver by Xiaomi Poco F4 GT with camera cover
Back cover or battery cover black by Xiaomi Poco F4 GT with camera cover
Adhesive precut back cover by Xiaomi Poco F4 GT