Xiaomi Poco M4 5G spare parts

Xiaomi Poco M4 5G Repuestos Technical Characteristics

The Xiaomi Poco M4 5G is an innovative smartphone with numerous features and functions, that require intricate components (repuestos) for the device to operate at its optimum level. Below are some of the significant technical aspects of these components.

• Screen: 6.5" Full HD+ DotDisplay, Corning Gorilla Glass 3, replacement necessary in case of burn-in, breaks, or non-functioning touch
• Battery: Li-Po 5000 mAh, non-removable, replacement required when phone struggles to hold charge
• Camera: Triple-lens rear camera setup (48MP, 2MP, 2MP), replacement needed when blurry or non-functioning
• Memory: Internal- 64GB 4GB RAM, 128GB 4GB RAM; card slot- microSDXC (uses shared SIM slot)
• Processor: MediaTek MT6833 Dimensity 700 5G (7 nm), requires replacement in case of performance lags
• Connectors: USB Type-C 2.0, support for 18W fast charging

Instructions on Replacing Xiaomi Poco M4 5G Repuestos

Below are detailed steps on how to replace the main parts for the Xiaomi Poco M4 5G. Please note, it's highly advisable to be performed only by trained professionals to avoid any possible damage or void of warranty.

Screen Replacement

• Turn the device off and remove Sim card tray by using the sim card removal tool.
• Heat the edges of the screen for 2-3 minutes using a heat gun or similar device.
• Use a suction cup to lift the screen gently, inserting a pick to pry it up.
• Continue to move the pick around the edges of the device, to free the screen entirely.
• Remove the connecting flex cable, and replace the screen with a new one. Ensure the flex cable is securely connected
• Test the screen operation before closing it up. Ensure everything works correctly.

Battery Replacement

• After removing the screen, locate the battery.
• Disconnect the battery from the circuit board gently, and then remove it from its slot.
• Replace with a new battery, taking care to install it securely and reconnect it to the circuit board.

Camera Replacement

• After removing the screen and battery, locate the camera.
• Disconnect the ribbon cable that is used to connect the camera. Be careful to avoid causing any damage.
• Remove the defective camera and replace it with a new one. Ensure that the new camera is securely connected to the ribbon cable.

Please note, this guide is only for illustrative purposes, and it's always advised to approach a professional service center for actual part replacements.