Xiaomi Poco M4 Pro 5G spare parts

Xiaomi Poco M4 Pro 5G Repuestos - Technical Characteristics

The Xiaomi Poco M4 Pro 5G comes with several unique repuestos (replacement parts) that make it a favorable choice among tech-savvy users. Here are some of the specifications:

• Screen: 6.6 inches, 1080 x 2400 pixels, 90Hz, IPS LCD
• Processor: MediaTek MT6891Z Dimensity 810 5G (6 nm)
• Battery: 5000mAh, Fast charging 33W
• Main Camera: 50 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF
• Selfie Camera: 16 MP, f/2.5, (wide), 1/3.06", 1.0µm

Parts Replacement Instructions

Please observe these detailed instructions for replacing Xiaomi Poco M4 Pro 5G repuestos. Before you start, make sure you have all necessary tools.

Screen Replacement

Follow these steps to replace the screen:

• Power off your phone and remove the SIM tray.
• Use a heat gun or a hair dryer around the edges of the display for about 2 minutes to loosen the adhesive.
• Insert a plastic card or opening tool in the gap between the screen and frame to start prying it open, be careful to not break the glass.
• Once the old screen is removed, clean the frame from any remaining adhesive and make sure the new screen comes with pre-applied adhesive lines.
• Finally, install the new screen and press it against the frame to adhere.

Battery Replacement

Follow these steps to replace the battery:

• Turn off your phone and remove the back cover by loosening the adhesive.
• Disconnect the battery connector from the motherboard.
• Remove the screws securing the battery.
• Use the pull tab or pry tool to remove the battery gently.
• Place the new battery inside and connect it to the motherboard. Then, secure it with the screws and reattach the back cover.

Always remember to follow these instructions to maintain the integrity of your phone. Using non-original repuestos or not following instructions may damage your device and will void the warranty.