Xiaomi Poco X3 Pro spare parts

Xiaomi Poco X3 Pro Repuestos Technical Specifications

The Xiaomi Poco X3 Pro is an advanced smartphone with outstanding technical specifications, making it one of the top picks in the mid-range market. Here is a list of its essential components, or repuestos, that can be replaced.

• Screen: 6.67-inch IPS LCD capacitive touchscreen, 1080 x 2400 pixels resolution
• Battery: Non-removable Li-Po 5160 mAh battery
• Camera: 48 MP Quad camera system on rear, 20 MP front camera
• Motherboard: Qualcomm SM8150-AC Snapdragon 860

Instructions For Replacing Xiaomi Poco X3 Pro Repuestos

Before you start, make sure you have the necessary tools and parts, including a SIM card ejector tool, a plastic pry tool, tweezers, and a PH000 screwdriver.

Screen Replacement

1. Switch off the phone and remove the SIM card tray.
2. Heat the front of the device to soften the adhesive holding the screen - a hairdryer or heat gun on a low setting will do the job.
3. Use the plastic pry tool to gently lift the screen starting from the edges, slowly working your way around the device.
4. Once the adhesive is loosened, lift the screen but do not remove it completely. There are cables connected to the back.
5. Disconnect these cables to completely free the screen.
6. Connect the cables of the new screen to the device and test before adhering it back in place.
7. If the screen works, remove any excess adhesive from the frame, apply new adhesive, and put the new screen in place.
8. Finally, apply pressure on the screen corners to ensure they stick to the adhesive properly.

Battery Replacement

1. Follow the steps for screen removal.
2. Once the screen is removed, locate the battery connector on the motherboard and disconnect it.
3. Keep in mind that the battery is also held down by strong adhesive. Heat the back of the device where the battery is to loosen the adhesive.
4. Use the plastic pry tool to gently remove the battery.
5. Place the new battery in, connect it to the motherboard, and put the screen back on.