Xiaomi Poco X3 spare parts

Xiaomi Poco X3 Technical Specifications

The Xiaomi Poco X3 is a smartphone with a strong performance-to-price ratio due to its comprehensive list of features and affordable price. Here, we outline some technical specifications:

• Processor: Qualcomm Snapdragon 732G
• Display: 6.67 inches IPS LCD, 1080 x 2400 pixels, 120Hz refresh rate
• Memory: 6GB RAM
• Storage: 64GB or 128GB, expandable up to 256GB via MicroSD
• Battery: 5160 mAh, fast charging 33W
• Camera: Quad rear camera with 64MP main lens, single 20MP front camera
• OS: MIUI 12, based on Android 10

Instructions for Replacing Xiaomi Poco X3 Repuestos (Parts)

Before starting, ensure you have the necessary tools: a Phillips screwdriver, a plastic opening tool, a spudger, a suction handle, tweezers, and a heat gun. Always remember to back up your data before beginning any repair and work in a clean, dust-free area.

Step 1: Power off the device and remove the SIM tray

Hold the power key and select "Power off". Once the device is off, use the SIM tray removal tool to eject the SIM card tray.

Step 2: Remove the back cover

Heat the edges of the back cover with a heat gun to soften the adhesive. Attach the suction handle to the back cover and gently pull to create a gap. Insert a plastic opening tool and slide it around the edges to separate the back cover.

Step 3: Disconnect the battery

Use the Phillips screwdriver to remove the screws securing the protective cover over the battery connector. Lift off the protective cover and use a spudger to disconnect the battery connector.

Step 4: Replace the needed parts

The procedure from here would differ based on the part you need to replace. Generally, most components are held down by screws and are connected to the motherboard via ribbon cables. Use your tools to carefully remove the faulty part and replace it with the new one.

Step 5: Reassemble the device

Connect the new part in place, secure it with the screws, and plug its cable into the motherboard. Connect the battery, place the protective cover back and secure it with screws. Snap the back cover back into place, ensuring there are no gaps. Put the SIM card tray back in.

Switch on the device and verify that the replaced part is functioning correctly. If any errors arise, disassembly may be required to ensure proper installation.