Xiaomi Poco X4 Pro spare parts

Xiaomi Poco X4 Pro Repuestos: Technical Specifications

The Xiaomi Poco X4 Pro is a high-performance smartphone designed for high-end usage. This section outlines its key technical specifications.

• Screen: 6.67 inches, 1080 x 2400 pixels, Super AMOLED, 395 PPI, 120Hz
• Processor: Qualcomm Snapdragon 870, Octa-core Kryo 585
• RAM: 6GB/8GB
• Storage: 128GB/256GB
• Battery: 4520mAh, Fast charging 33W
• Camera: Quadruple rear camera 48MP + 8MP + 2MP + 2MP
• OS: MIUI 12 based on Android 11

Xiaomi Poco X4 Pro Repuestos: Replacement Instructions

Replacing parts on your Xiaomi Poco X4 Pro should be done with extreme caution, as improper handling may cause damage to the parts. Follow the instructions outlined below for a safe replacement process.

Preparation

Make sure you have all necessary tools for the procedure including, a screwdriver, tweezers, plastic opening tools and a new replacement part.

Screen Replacement

1. Switch off your Xiaomi Poco X4 Pro before starting the repair.

2. Remove the SIM tray and the two Pentalobe screws at the bottom of the phone.

3. Use a plastic opening tool to gently pry open the back cover from the bottom, then move upwards slowly detaching the clips holding the frame and rear cover.

4. Remove the screws holding the battery connector cover and disconnect the battery.

5. Remove the screws holding the screen connector cover and disconnect the screen.

6. Gently remove the old screen, add the new screen and reconnect the screen connector

7. Screw back the screen connector cover, connect the battery, and screw back the battery connector cover.

8. Clip the rear cover back onto the frame and screw in the bottom Pentalobe screws.

9. Ensure the new screen is working properly by powering on the device.

Note: This guide is simplified and maybe be missing necessary steps. Always consult a professional if you're unsure.