Xiaomi Pocophone F2 Pro spare parts

Xiaomi Pocophone F2 Pro Technical Specifications

The Xiaomi Pocophone F2 Pro is a high-performance smartphone packed with several powerful features. Here are its technical specifications:

• Display: 6.67-inch Super AMOLED, 1080 x 2400 pixels, 395 PPI
• CPU: Qualcomm SM8250 Snapdragon 865
• GPU: Adreno 650
• RAM: 6GB or 8GB
• Storage: 128GB or 256GB
• Battery: 4700mAh
• Operating system: Android 10, upgradable to Android 11, MIUI 12
• Camera: 64 MP, f/1.9, 26mm (wide), 5 MP, f/2.2, (macro), 13 MP, f/2.4, 123˚, (ultrawide), 2 MP, f/2.4, (depth)
• Front Camera: Motorized pop-up 20 MP, f/2.2, (wide)

Instructions on How to Replace Xiaomi Pocophone F2 Pro Repuestos

Follow these detailed steps to successfully replace parts on your Xiaomi Pocophone F2 Pro. Please take note, opening your device can void its warranty and carries risk of damage, proceed with caution.

Tools Needed

• Screwdriver
• Plastic Opening Tools
• Tweezers
• New parts (repuestos)

Steps to Replace Xiaomi Pocophone F2 Pro Repuestos

Here are the steps to replace the damaged parts of the Xiaomi Pocophone F2 Pro:

1. Switch off the Xiaomi Pocophone F2 Pro.
2. Insert a plastic opening tool at the bottom of the phone to create an opening between the display and the back cover.
3. Slide the tool all the way around the phone to loosen the back cover. Lift it off carefully.
4. Remove the screws securing the plastic cover that hides the battery and motherboard. Use the appropriate screwdriver.
5. Unplug the battery connector from the motherboard to disconnect the battery. This will ensure your safety while working on the device.
6. If you need to replace the screen, disconnect the screen cable from the motherboard and then replace the screen.
7. If you are replacing the camera, disconnect the camera connector and replace the camera module.
8. Before assembling the phone back, check that the new parts are working properly.
9. Connect all the parts back. First, the screen cable, then the camera if they were disconnected. Finally, connect the battery connector to the motherboard.
10. Replace the plastic cover and refit the screws.
11. Finally, reassemble the back cover. Your Xiaomi Pocophone F2 Pro should be working as new now.

Remember, if you face difficulties or if the device malfunctions after attempting repair, seek professional help.