Xiaomi Redmi 10C spare parts

Xiaomi Redmi 10C Repuestos Technical Characteristics

The Xiaomi Redmi 10C Repuestos is known for its high-quality parts and its seamless compatibility with the Xiaomi Redmi 10C smartphone. Below, we detail some of the core technical characteristics of this set of replacement parts.

• Screen: LCD Capacitive touchscreen, 16M colors, size 6.53 inches approximately.
• Battery: Non-removable Li-Po 5000 mAh battery.
• Camera: Rear camera 13 MP, Front camera 8 MP.
• Body: Glass front, plastic back, plastic frame.
• Audio Jack: 3.5mm jack available for headphones or speakers.

Instructions for Replacing Xiaomi Redmi 10C Repuestos

Tools Required:

• Precision Screwdriver Set
• Plastic Opening Tools
• Tweezers

Procedure:

Below are detailed steps that you can follow to replace the Xiaomi Redmi 10C Repuestos:

1. Step 1: Start by switching off your Xiaomi Redmi 10C. This prevents any short-circuits during the replacement process.
2. Step 2: Using the plastic opening tools, gently pry open the back cover of the phone. Take care not to damage the plastic clips that hold it in place.
3. Step 3: Remove the screws using a screwdriver. Keep the screws in a safe place because you will need to replace them later.
4. Step 4: Carefully disconnect the battery connector from the motherboard. This is to prevent any damage from accidental powering on.
5. Step 5: Depending on the component to be replaced, unscrew and gently remove it. This may include the camera, speaker, or screen.
6. Step 6: Replace the old part with the new one from your Xiaomi Redmi 10C Repuestos. Ensure that it fits and connects properly.
7. Step 7: Reverse the dismantling steps to reassemble your smartphone. Power on your device to ensure the replacement was successful.

Please note, despite these instructions, a professional should conduct the replacement to prevent possible damage to the smartphone.