xiaomi redmi 12 Spare Parts

Xiaomi Redmi 12 Repuestos (Spare Parts) and Replacement Guide

The Xiaomi Redmi 12 is a popular smartphone known for its impressive features and sturdy design. However, like any other electronic device, it may require spare parts replacement over time. Herein, we will detail the technical specifications of typical Xiaomi Redmi 12 Repuestos and provide step-by-step instructions on how to replace them.

Technical Specifications

• Display: IPS LCD, 6.53 inches, 1080 x 2400 pixels, 20:9 ratio
• Processor: Octa-core
• Memory: 4 GB/6GB RAM, 64GB/128GB ROM
• Battery: Li-Po 5000 mAh, non-removable
• Camera: 48 MP, f/1.8, 26mm (wide), 1/2.0", 0.8µm, PDAF
• Operating System: Android 10, MIUI 12

Instructions to Replace Spare Parts

Before proceeding, ensure you have the necessary tools such as a SIM card ejector, heat gun, opening tool, and a screwdriver.

Replacing the Screen

1. Power off the phone and remove the SIM Card tray.
2. Apply heat uniformly on the edges of the screen using the heat gun to loosen the adhesive.
3. Insert the opening tool gently between the screen and the frame and continually slide around the edges to separate.
4. Carefully remove the broken screen and replace it with a new one.
5. Reapply adhesive and reassemble the screen, making sure it fits snugly onto the frame.

Replacing the Battery

1. After removing the screen following above steps, locate the battery.
2. Remove any screws securing the battery.
3. Carefully disconnect the battery connector from the motherboard.
4. Gently lift the battery out and replace it with a new one.
5. Reconnect the battery connector and secure it with the screws.
6. Reassemble the screen.

Always handle the replacement process with utmost care as any mistake can lead to further device complications. If you are unsure about performing these tasks yourself, it is recommended to seek professional assistance.