Xiaomi Redmi 6 Pro spare parts

Xiaomi Redmi 6 Pro Technical Specifications

The Xiaomi Redmi 6 Pro, known for its affordability and feature-rich capabilities, comes with some important and unique specifications.

• Screen: IPS LCD capacitive touchscreen, 16M colors
• Size: 5.84 inches, 85.1 cm2 (~79.5% screen-to-body ratio)
• Resolution: 1080 x 2280 pixels, 19:9 ratio (~432 ppi density)
• OS: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie), MIUI 11
• Chipset: Qualcomm MSM8953 Snapdragon 625 (14 nm)
• Battery: Non-removable Li-Po 4000 mAh battery

Instructions for Replacing Xiaomi Redmi 6 Pro Repuestos

Before starting, please ensure you have the necessary tools: a screwdriver, nylon spudger, tweezers, and a replacement part.

Step 1: Remove the back cover

• Power off the Xiaomi Redmi 6 Pro.
• Use a heat gun or blow dryer to soften the adhesive around the edges of the back cover.
• Insert a nylon spudger in the seam between the back cover and the frame.
• Gently pry up to open the phone. Be careful to avoid damaging the internal components.

Step 2: Disconnect the battery

• Locate the battery connector on the motherboard.
• Use tweezers to carefully detach it.

Step 3: Replace the faulty part

• Identify the faulty part that needs replacement.
• Gently remove it using the appropriate tool.
• Double-check the replacement part for any damage before installing it.
• Install the new part and make sure it fits properly.

Step 4: Reassemble the phone

• Reconnect the battery cable to the motherboard connector.
• Align the back cover with the rest of the phone.
• Press down firmly to re-adhere it to the phone body.
• Finally, power on the phone to ensure everything is functioning correctly.

For optimal performance of your Xiaomi Redmi 6 Pro, always use original parts for replacements and ensure they are installed correctly.