Xiaomi Redmi 7 spare parts

Xiaomi Redmi 7 Repuestos – Technical Characteristics

All the Xiaomi Redmi 7 repuestos listed here are OEM parts, assuring the best possible replacement quality.

Screen Digitizer Assembly

• Resolution: 720 x 1520 pixels
• Screen Size: 6.26 inches
• Color Depth: 16 million colors

Battery

• Capacity: 4000 mAh
• Type: Non-removable Li-Po

Camera

• Rear: Dual 12 MP, f/2.2 + 2 MP, depth sensor
• Front: 8 MP, f/2.0

Instructions for Replacing Xiaomi Redmi 7 Repuestos

NOTE: It's recommended to perform this operation in a clean, well-lit environment and to carefully store all removed parts and screws for reassembly.

Screen Digitizer Assembly Replacement

The replacement process is as follows:

• Power off the smartphone and remove the SIM card tray.
• Use a plastic pry tool to gently separate the back cover from the frame.
• Remove the screws securing the battery connector and disconnect it.
• Use a hot air gun to loosen the adhesive securing the screen.
• Gently remove the old screen from the front assembly.
• Place the new screen on the front assembly and reconnect the battery.

Battery Replacement

The steps are as follows:

• After separating the back cover, find and remove the screws securing the battery connector.
• Disconnect the battery connector using a plastic pry tool.
• Use a plastic pry tool to gently lift and remove the battery.
• Position the new battery in the same alignment as the old one and press firmly to secure it.