Xiaomi Redmi 7A spare parts

Xiaomi Redmi 7A Repuestos Technical Characteristics

The Xiaomi Redmi 7A is a budget smartphone and its parts, or repuestos as they are referred to, have the following technical characteristics:

• Screen: 5.45 inches, 720x1440 pixels, LCD Capacitive touchscreen
• Battery: Li-Po 4000 mAh, non-removable
• Back Camera: 12 MP, f/2.2, 1/2.9", 1.25µm, PDAF
• Front Camera: 5 MP, f/2.2, 1/5", 1.12µm
• Operating System: Android 9.0 (Pie), upgradable to Android 10, MIUI 11
• CPU: Octa-core 2.0 GHz Cortex-A53
• GPU: Adreno 505
• RAM: 2GB / 3GB
• Storage: 16GB / 32GB, expandable via microSDXC (dedicated slot)
• SIM card slot: Dual SIM (Nano-SIM, dual stand-by)

Replacing Xiaomi Redmi 7A Repuestos

Before you start replacing parts on your Xiaomi Redmi 7A, ensure you have the necessary tools including a screwdriver, spudger, tweezers, and a prying tool. Always remember to back up your data before any repair.

Screen Replacement

Here are the steps for replacing the screen:

• Power off your phone and remove the SIM card tray.
• Use a heat gun or a hairdryer to heat the edges of the screen to soften the adhesive.
• Insert a prying tool between the screen and the frame to lift the screen.
• Be careful not to damage the flex cable.
• Remove the old screen and clean any residual adhesive from the frame.
• Apply new adhesive to the frame, align the new screen carefully and press it into place.

Battery Replacement

To replace the battery, follow these steps:

• Power off your phone.
• Remove the back cover using the prying tool.
• Unscrew the screws holding the battery connector cover and remove it.
• Disconnect the battery connector and the pull tab to remove the battery.
• Place the new battery in, connect the cable, and replace the back cover and screws.

Note: This is a general guide for the Xiaomi Redmi 7A. The actual replacement process may vary depending on the exact model and part to be replaced. If you are not comfortable with DIY repairs, consider hiring a professional.