Xiaomi Redmi 9C premium quality

Xiaomi Redmi 9C Calidad Premium: Technical Specifications

The Xiaomi Redmi 9C Calidad Premium is a pioneering smartphone with a diverse range of features. Catered to the current technological landscape, it's an affordable yet powerful gadget suitable for all.

Key Features

• Display: 6.53-inch IPS LCD, 720 x 1600 pixels
• Processor: Mediatek Helio G35 Octacore
• RAM: 2GB/3GB
• Storage: 32GB/64GB; expandable with microSDXC
• Camera: 13MP + 2MP + 2MP Rear and 5MP Front Camera
• Battery: Non-removable Li-Po 5000mAh Battery

Instructions for Replacing Xiaomi Redmi 9C Calidad Premium

Before you proceed with the following steps, make sure you have the appropriate tools including a plastic opening tool, PH00 screwdriver, and a small suction handle.

Step 1: Power off the device

Press and hold the 'Power' button to switch off your device. It's crucial in preventing any accidental short circuits during the repair process.

Step 2: Remove the back cover

Using the plastic opening tool, starting from the bottom of the device, pry open the back cover. Run the tool around the edges carefully pressing the clips holding the cover in place.

Step 3: Unscrew the Plate

Using your PH00 screwdriver, unscrew the screws holding the protection plate over the battery and connector cables. Remove the plate once all screws are removed.

Step 4: Disconnect the battery

Using the plastic opening tool, carefully disconnect the battery connector from the motherboard.

Step 5: Replacing the battery

Use the small suction handle to gently lift the battery out from the phone. Replace it with the new one, ensuring it is placed properly.

Step 6: Reassemble the phone

Reconnect the battery to the motherboard. Reattach the protection plate and screw it back into place. Finally, press the back cover into place until it clicks on all edges.

Step 7: Power on the device

Hold the 'Power' button to switch on your device. Confirm that everything is working as expected.

Note: Always remember to work gently during the disassembly and reassembly process to prevent any kind of damage to the device.