Xiaomi Redmi 9T Specifications
In this section, we will list down the technical specs for the Xiaomi Redmi 9T smartphone.
- Screen: 6.53-inch IPS LCD, 1080 x 2340 pixels, 19.5:9 ratio (~395 ppi density).
- Processor: Qualcomm SM6115 Snapdragon 662 (11 nm) Octa-core (4x2.0 GHz Kryo 260 Gold & 4x1.8 GHz Kryo 260 Silver).
- Memory: 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM.
- Operating System: Android 10, MIUI 12 with planned upgrade to Android 11, MIUI 12.5.
- Camera: Main Camera Quad 48 MP, 8 MP, 2 MP, 2 MP. Selfie Camera 8 MP.
- Battery: Non-removable Li-Po 6000 mAh battery.
Guide for Xiaomi Redmi 9T Repuestos Replacement
Follow this step-by-step guide to replace your Xiaomi Redmi 9T repuestos. Please ensure that the device is powered off before starting the process.
Pre-Replacement Steps
- Switch off your phone and remove the SIM card tray.
- Heat the edges of your phone to soften the adhesive on the back cover. You can use a hair dryer or a heat gun but be extremely careful not to apply too much heat as it may damage the internal components or the screen.
- Use a plastic spudger or a similar tool to pry open the edges and remove the back cover.
Battery Replacement
- Unscrew all visible screws holding the battery cover in place and remove the cover.
- Disconnect the battery connector carefully.
- Now, gently lift and remove the battery from the phone.
- Fit the new battery in, connect the battery connector and screw back the cover.
Screen Replacement
- Unscrew and remove the frame holding the screen.
- Next, disconnect the connectors linking the screen to the motherboard.
- Carefully lift and remove the damaged screen.
- Fit the new screen in, connect the connectors and screw back the frame.
After replacement, make sure to turn on the device to check if the replaced parts are working correctly.
Note: If you're not confident about performing these operations, seek professional help. The risk of damaging your device may worsen the problem if the process is not executed properly.
Less