Xiaomi Redmi A3 spare parts

Xiaomi Redmi A3 Repuestos - Detailed Description and Replacement Guide

Xiaomi Redmi A3 is a robust and high-performance smartphone that has gained popularity due to its impressive specifications and easy reparability. Here, we will provide a detailed guide on how to replace various Xiaomi Redmi A3 repuestos (parts).

Technical Specifications

• Display: 6.09 inches AMOLED, 720 x 1560 pixels, 19.5:9 ratio
• Processor: Qualcomm SDM665 Snapdragon 665
• RAM: 4GB
• Storage: 64GB or 128GB
• Camera: Triple 48MP + 8MP + 2MP rear, 32MP Front Camera
• Battery: Non-Removable 4030 mAh battery
• Operating System: Android 9.0 (Pie); MIUI 10

Repuestos Replacement Guide

To replace a component on the Xiaomi Redmi A3, you will need a set of precision screwdrivers, a prying tool, and replacement parts. Always take due caution whilst undertaking any repairs.

Replacing the Screen

• First, power off the device, then remove the SIM card tray.
• Heat the sides of the device slightly to loosen the adhesive holding the back cover. Use the prying tool to carefully lift the cover off.
• Unscrew and remove the protective cover over the motherboard.
• Disconnect the battery connector. Subsequently, disconnect the display connector.
• To install the new screen, reverse these steps.

Replacing the Battery

• To start, ensure that you power off the device and remove the SIM card tray.
• Use slight heat and a prying tool to remove the back cover.
• Next, unscrew and take off the protective motherboard cover.
• Disconnect the battery connector and gently pry the battery out of its compartment.
• Place the new battery in, reconnect the battery connector, and reverse the steps to reassemble the device.

Please note that disassembling your Xiaomi Redmi A3 for any reason may void your warranty. If in doubt, please seek professional help.