Xiaomi Redmi K20 repuestos

Xiaomi Redmi K20 Repuestos: Technical Characteristics

The Xiaomi Redmi K20 comes with a range of technical features that require specific repuestos (parts) for repair. The main components include the following:

• Display: 6.39 inch AMOLED screen with Full HD resolution.
• Processor: Qualcomm Snapdragon 855.
• RAM: 6GB/8GB.
• Storage: 64GB/128GB/256GB.
• Camera: Triple Rear Camera of 48MP + 8MP + 13MP.
• Battery: 4000mAh capacity with 18W fast charge.

Instructions for Replacing Xiaomi Redmi K20 Repuestos

Screen Replacement

Follow the steps below to replace the screen of your Xiaomi Redmi K20 device:

1. Turn off the device and remove the SIM card tray.
2. Heat the front of the device to soften the adhesive for the screen.
3. Use a suction cup tool to lift the screen gently, then insert a thin plastic card to keep the screen lifted.
4. Unscrew all the screws securing the motherboard and detach the motherboard carefully.
5. Disconnect the battery and screen flex connectors from the motherboard.
6. Finally, install the new screen and reassemble your phone following these steps in reverse order.

Battery Replacement

To replace the battery on your Xiaomi Redmi K20 device, follow the steps below:

1. Turn off the device.
2. Use a heat gun to loosen the adhesive holding the back cover. Be sure to keep the heat gun at a safe distance from the phone to avoid heat damage.
3. Once the adhesive is loosened, use a plastic pry tool to remove the back cover.
4. Unscrew and remove the cover that protects the battery connector and other connectors on the motherboard.
5. Detach the battery connector to disconnect the power supply.
6. Remove the adhesive securing the battery to the phone and lift out the battery.
7. Place a new battery into the device and reassemble the phone following these steps in reverse order.