Xiaomi Redmi Note 10 spare parts

Xiaomi Redmi Note 10 Repuestos - Technical Characteristics

Xiaomi Redmi Note 10 repuestos are parts and components of the Xiaomi Redmi Note 10 smartphone. Below are the key technical specifications:

• Display: Super AMOLED, 6.43 inches, 1080 x 2400 pixels resolution
• Processor: Qualcomm SM7125 Snapdragon 720G, Octa-core
• Operating System: Android 11, MIUI 12
• Battery: Li-Po 5020mAh
• Front Camera: 13 MP, f/2.5, wide
• Rear Camera: 48 MP, f/1.8, wide, 8 MP, f/2.2, ultra wide, 2 MP, f/2.4, macro, 2 MP, f/2.4, depth
• Memory: 64GB 4GB RAM, 128GB 6GB RAM, UFS 2.2

Instructions on Replacing Xiaomi Redmi Note 10 Repuestos

Disclaimer

Please note that the below described replacement instructions should be executed by a professional or someone with proper technical skills. Proceeding without appropriate knowledge can result in permanent damage to the device.

Replacing Xiaomi Redmi Note 10 Screen

Below is the step-by-step guide:

• Turn off your device and disassemble the SIM card tray.
• Heat the edges of the phone's screen for about two minutes to soften the sticker.
• Use a sucker and a pry bar to gently detach the screen from the device's body.
• Remove remaining glue and clean the surface.
• Setup the new screen and test its functionality before reassembling it on the device.
• If everything works fine, use B7000 glue or a double-sided sticky tape to assemble the new screen.

Replacing Xiaomi Redmi Note 10 Battery

Follow these steps:

• Turn off the phone and remove the SIM card tray.
• Detach the back cover using a heated disassembling machine.
• Remove the screws securing the phone's frame.
• Detach the frame and disconnect the battery.
• Insert the new battery and connect the battery cable.
• Reassemble the phone making sure all screws are securely tightened.