Xiaomi Redmi Note 10S spare parts

Xiaomi Redmi Note 10S Technical Characteristics

The Xiaomi Redmi Note 10S is a powerful smartphone model known for its robust list of features and components. Known as repuestos in Spanish, these parts contribute to the overall functionality of the device.

• Display: 6.43" AMOLED, 1080x2400 pixels
• Processor: MediaTek Helio G95
• RAM: 6GB/8GB
• Storage: 64GB/128GB, expandable via microSDXC
• Battery: 5000mAh, Fast Charging 33W
• Camera: Quad camera 64MP + 8MP + 2MP +2MP
• Software: Android 11, MIUI 12.5

Instructions for Replacing Repuestos

Please note that the parts replacement should be conducted only by trained professionals, to avoid any possible damages to the device. Always turn off the phone and remove the battery before starting.

Prepare the Necessary Tools

You will need a screwdriver, a suction cup, plastic opening tools, tweezers, and a sharp-ended spudger.

Removing the Back Cover

• Use the suction cup to gently lift the back cover after heating it a bit to loosen the adhesive.
• Move a plastic tool around to cut the adhesive and completely remove the back cover.

Remove the Battery

• Unscrew the screws fixing the battery connector, and disconnect the battery connector using tweezers.
• Unsolder the two wires connecting the battery to the motherboard and lift the battery out.

Replace the Necessary Repuesto

• Depending on the part, you may need to continue removing other components carefully with the necessary tool.
• Once the faulty part is exposed, replace it with the new Xiaomi Redmi Note 10S repuesto.

Reassemble the Phone

Follow the steps you took to disassemble the phone, but in reverse order. Re-solder the battery, attach the connector, attach the back cover with suitable adhesive, and finally, turn on the phone to check if everything is okay.