Xiaomi Redmi Note 10T 5G spare parts

Technical Characteristics of Xiaomi Redmi Note 10T 5G Repuestos

The Xiaomi Redmi Note 10T 5G Repuestos are key components of the smartphone model. They include main parts such as:

• Screen: This is a 6.5 inch 1080x2400 pixels IPS display.
• Battery: A Li-Po 5000 mAh, non-removable battery powers the device.
• Motherboard: Acts as the central hub of the smartphone, hosting the CPU and memory.
• Back Camera: 48 MP, f/1.8, 26mm (wide), 1/2.0", 0.8µm, PDAF main camera.
• Front Camera: 8 MP, f/2.0, (wide) front camera.

Instructions for replacing Xiaomi Redmi Note 10T 5G Repuestos:

I. Screen Replacement:

1. Begin by switching off the mobile and removing the SIM card holder.
2. Use a heat gun or heated pad to warm the edges of the screen.
3. Once sufficiently warmed, use a professional-grade suction cup to carefully lift the display.
4. Detach the flex cables connecting the screen to the motherboard. Replace the scaled screen with the new one and reconnect the cables.
5. Reassemble the mobile and switch on to test the new screen.

II. Battery Replacement:

1. After turning off the mobile and removing the SIM card tray, heat and extract the screen as detailed above.
2. Disconnect the battery flex cable and remove any screw and bracket holding the battery down.
3. Use a plastic pry tool to carefully lift the battery out from the shell
   Replace the old battery with the new one.
4. Reconnect the battery flex cable, secure the new battery with the bracket and screws, if any.
5. Reassemble and test the mobile.

III. Camera Replacement:

1. Begin with a switched-off mobile, remove the SIM tray, and open up the mobile using the processes as above.
2. Disconnect the flex cable attached to the faulty camera and carefully remove it.
3. Secure the new camera at the slot, and reconnect the flex cable.
4. Reassemble and test the mobile.

Note: This process requires specialised tools and experience, if you are not confident, please seek professional assistance.