Xiaomi Redmi Note 11 Pro Plus 5G spare parts

Xiaomi Redmi Note 11 Pro Plus 5G Technical Specifications

The Xiaomi Redmi Note 11 Pro Plus 5G is powered by a Snapdragon 695 chipset, has a 6.67 inch Full HD+ AMOLED display with a high refresh rate of 120Hz, 6 to 8 GB RAM, and 128 or 256 GB internal storage.

Battery Replacement Instructions

Items Required

• Small Phillips-head screwdriver
• Plastic opening tools
• Suction cup

Steps

WARNING: Repairing your phone can be dangerous. Proceed with caution.

1. Turn off your Xiaomi Redmi Note 11 Pro Plus 5G and remove the SIM card tray.
2. Heat the edges of the back cover to soften the adhesive. Then, attach a suction cup to the back cover. While lifting the suction cup, insert a plastic opening tool between the back cover and the frame. Move the tool along the edge to release the adhesive.
3. There are 15 screws holding the protective plate in place. Use the Phillips-head screwdriver to remove them. Then you can lift the protective plate and remove it carefully.
4. Disconnect the battery cable from the motherboard. Make sure to do this before you begin removing any components.
5. Take the new battery, and place it in the phone. Connect the battery cable to the motherboard.
6. Reattach the protective plate and secure it with the promised 15 screws.
7. Carefully reapply the back cover, ensuring all clips are secure and the seals are tight.
8. Turn on your Xiaomi Redmi Note 11 Pro Plus 5G, the replacement is finished.

Note: If you are not confident in your ability to perform this repair, it is recommended that you take your phone to a professional.