Xiaomi Redmi Note 12 4G spare parts

Xiaomi Redmi Note 12 4G Specifications

Before we delve into the detailed instructions on how to replace the Xiaomi Redmi Note 12 4G repuestos, here are the technical characteristics of the device:

• Display: 6.4 Inch AMOLED, 1080 x 2340 pixels
• Processor: Octa-core (2x2.3 GHz Kryo 465 Gold & 6x1.8 GHz Kryo 465 Silver)
• RAM: 6GB / 8GB
• Internal Storage: 128GB / 256GB expandable via microSDXC (dedicated slot)
• Camera: Quad-rear camera with 64MP main sensor and 20MP front camera
• Battery: 5020 mAh, non-removable
• Operating System: Android 11 with MIUI 12

Instructions for Replacing Xiaomi Redmi Note 12 4G Repuestos

Please ensure that you take caution when working with smartphone components, some parts may be delicate.

Tools Required

• Screwdrivers: Phillips #00 Screwdriver
• Plastic Opening Tools
• Spudger
• Tweezers

Step-by-Step Guide

Follow these steps to replace the Xiaomi Redmi Note 12 4G repuestos:

1. Turn off your Xiaomi Redmi Note 12 4G before you start.
2. Remove the SIM card tray from the side of the phone using the SIM card removal tool.
3. Use a heat gun or hairdryer to warm up the edges of the back cover. This will help to loosen the adhesive securing the back cover to the phone.
4. When the adhesive has been sufficiently loosened, insert the plastic opening tool into the small gap between the back cover and the frame of the phone. Slide the tool around the edges of the phone to completely separate the back cover.
5. Proceed with the replacement of the defective component(s) - battery, camera, speaker etc. using the appropriate tools. Pay close attention not to damage other portions of the phone during this process.
6. Once all the necessary components have been replaced, carefully reapply the back cover to the body of the device and reheat using the heat gun to secure it back in place.
7. Finally, replace the SIM card tray and power on your device to check if it is functioning as expected.