Xiaomi Redmi Note 13 5G spare parts

Xiaomi Redmi Note 13 5G Technical Characteristics

The Xiaomi Redmi Note 13 5G is known for its advanced technological features, which make it an efficient and competitive smartphone. Below are its technical characteristics:

• Size: 161.9 x 75.9 x 8.9 mm
• Weight: 205g
• Screen: IPS LCD, 90Hz, HDR10, 400 nits (typ)
• Resolution: 1080 x 2400 pixels
• Operating System: Android 11, MIUI 12.5
• Processor: MediaTek Dimensity 700 5G
• Internal Storage: 64GB/128GB
• RAM: 4GB/6GB
• Camera: 48 MP, f/1.8, (wide), 2 MP, f/2.4, (depth)
• Battery: Li-Po 5000 mAh

Instructions to Replace Xiaomi Redmi Note 13 5G Repuestos

Below are detailed instructions for replacing various parts of the Xiaomi Redmi Note 13 5G:

Screen Replacement

• Before touching your device, make sure you're grounded to avoid static electricity. Also, switch off your device completely.
• Remove the SIM card tray using a SIM ejector tool or a paperclip.
• Pry open the back case using a suction cup or a plastic pry tool, apply heat if necessary.
• Remove all visible screws attaching the phone's frame with a suitable screwdriver.
• Carefully lift the outer cover and disconnect the battery from the phone.
• Further, disconnect and remove the old screen panel.
• Replace it with a new panel and reconnect it to the main board, followed by the battery, and then attach the phone's frame again.
• Screw back all the screws and gently push the back cover into place.
• Insert the SIM card tray, power on your phone, and check the new screen functionality.

Note: It's always recommended to visit a professional repair center for such tasks if you aren't skilled because any improper step can cause irreversible damage to the device. Moreover, warranty voids if the device is self-opened/repair attempted.

Battery Replacement

• Follow the same initial steps for screen replacement up to the disconnection of the battery.
• Normally, the battery is glued with light adhesive, just carefully pry it up. Do not bend or stabbed the battery as it can catch fire or explode.
• Replace the old battery with the new one and connect it to the main board.
• Then reassemble the device the same way as described in the former part and power on your device to check the new battery's performance.

Note: Always replace the battery with matched specifications, especially capacity (mAh).

Please kindly refer to the user manual provided by Xiaomi for more detailed instructions or visit a trusted and certified phone repair shop.