Xiaomi Redmi Note 3 Note 3 Pro european version

Xiaomi Redmi Note 3 Note 3 Pro version Europea: Technical Specifications

The Xiaomi Redmi Note 3 Pro, Europea version, is a phone that combines advanced functionality with an attractive design aesthetic. Here are its key technical characteristics:

• Display: 5.5-inch full HD IPS display with 1920 x 1080 resolution.
• Processor: Qualcomm Snapdragon 650, 64-bit hexa-core processor.
• Memory: Available in 2GB/3GB RAM with 16GB/32GB internal storage.
• Camera: 16MP rear camera with PDAF and dual-LED flash and 5MP front camera.
• Battery: Non-removable Li-Po 4000 mAh battery.
• Operating System: Android 6.0 Marshmallow, upgradable to 7.0 (Nougat).

Instructions for Replacing the Xiaomi Redmi Note 3 Note 3 Pro Version Europea

The following is the detailed process of doing a full replacement of the Xiaomi Redmi Note 3 Pro, Europea version. Please note that this task requires professional experience, and any damage to the device during this process will void the warranty.

Step 1: Gather Your Tools

You'll need a SIM card ejector tool, a #00 Phillips screwdriver, a plastic opening tool, and a small suction cup.

Step 2: Remove the Back Cover

Start by turning off the phone. Then remove the SIM card tray using the SIM card eject tool. After, remove the two Phillips screws on the bottom edge of the phone. Using the gentle plastic opening tool, wedge between the back cover and frame, and move it around the phone to release the clips.

Step 3: Disconnect the Battery

The battery plug can be located near the top edge of the phone. Gently, with the plastic tool, disconnect the battery connector from its socket on the motherboard.

Step 4: Remove Motherboard

Remove all the screws fixing the motherboard and carefully unplug all the connectors, starting from top to bottom. Make sure to keep the screws organised as you remove them.

Step 5: Replacement

Once everything is removed, you can now replace the damaged part whether its the screen, battery, or other internal part. Remember to handle the replacement part with care.

Step 6: Reassembly

Attach all the connectors back to the motherboard, screw it back on, connect the battery, and finally, snap back the back cover. Power on the phone to see everything is functioning.

This process requires patience and precision. If you encounter any issues, do seek professional help.