Xiaomi Redmi Note 4X

Xiaomi Redmi Note 4X Technical Characteristics

This smartphone model from Xiaomi is a powerful device that is packed with many remarkable features. Here is a detailing of its technical aspects:

• Display: 5.5-inch full-HD (1080x1920 pixels)
• Processor: Qualcomm Snapdragon 625
• RAM: Available in 3GB/ 4GB variants
• Storage: Available in 16GB/ 32GB/ 64GB, expandable up to 128GB
• Camera: 13 Megapixel rear camera and a 5 Megapixel front-facing camera
• Operating System: MIUI 8, based on Android 6.0 (Marshmallow)
• Battery: 4100mAh non-removable battery

Instructions for Replacing the Xiaomi Redmi Note 4X

Tools Required

• Screwdriver
• Spudger
• Tweezers
• Plastic opening tools
• Phillips #00 Screwdriver

Procedure

Please ensure that you follow the steps closely to successfully replace your Xiaomi Redmi Note 4X:

1. Power off your phone: Ensure that your device is turned off to prevent potential damage to internal parts.
2. Remove the SIM card tray: Use the SIM eject tool or a paperclip to remove the SIM card tray.
3. Remove the back cover: Loosen and remove the two screws at the bottom of the phone. Use a plastic opening tool to gently lift the edges of the back cover and remove it.
4. Unscrew the battery: Unscrew and remove the metal plate, disconnect the battery connector with a spudger.
5. Remove the battery: Gently lift the battery using a plastic card or spudger.
6. Install new battery: Place the new battery into the phone. Secure it with the screws and metal plate. Reconnect the battery connector.
7. Reassemble the phone: Snap the back cover on, reinsert the SIM card tray, and screw the screws back in at the bottom of the phone.
8. Power on the phone: Press the power button to turn on your phone. Check that it powers on successful and functions normally.

By following these steps, you should be able to replace the Xiaomi Redmi Note 4X confidently and safely.