Yota Yotaphone 2 spare parts

Technical Specifications of Yota Yotaphone 2 Repuestos

The Yota Yotaphone 2 Repuestos are the replacement parts for this unique dual-display device. These components maintain the device's functionality and include the following:

• Screen Size: 5 Inches Full HD AMOLED Display
• Resolution: 1920 x 1080 Pixels
• Back Screen: 4.7 Inches E-Ink Display
• Processor: 2.3Ghz Quad-Core Qualcomm Snapdragon 801
• RAM: 2GB
• Storage: 32GB
• Camera: 8 MP Rear, 2.1 MP Front
• Battery: 2500 mAh

Instructions on How to Replace Yota Yotaphone 2 Repuestos

Replacing parts of the Yota Yotaphone 2 requires utmost care to prevent damage. Always ensure to use the correct tools and follow these steps:

Preparation

• Ensure the device is powered off and disconnected from any power sources
• Use a soft, dry cloth to clean the device and free your workspace from dust
• Arrange your replacement parts and necessary tools within reach

Screen Replacement

To replace the screen of your Yota Yotaphone 2, follow these steps:

• Use a heat gun or a hair dryer to warm the edges of the screen, loosening the adhesive
• Using a plastic tool, carefully pry the screen from the device
• Remove the old adhesive from device and apply a new, thin layer of adhesive
• Place the new screen on the device and press it into place

Battery Replacement

If you need to replace your phone’s battery, use the following instructions:

• Use a small screwdriver to remove the screws holding the phone’s back cover
• Remove the back cover and disconnect the battery connector from the motherboard
• Remove the old battery and replace it with the new one
• Reconnect the battery connector, replace the back cover, and reinstall the screws

After any part replacement, test the device’s functionality thoroughly to ensure everything is operating correctly. If any issues are noticed, check all connections and repeat the process if necessary.